noco boost plus gb40 70mai Jump Starter Max 18000mah 70mai Car Jump Starter PS06 PS01 1000A Power Bank Car Jumpstarter Auto Buster Emergency Booster car jumper Jump Starters

Brand Name:	ninephi
Origin:	CN(Origin)
Battery Capacity(mAh):	18000-20000
Peak Current:	1000 A
Conversion Rate:	85%~90%
Number Of Built-in Batteries:	6
External Testing Certification:	MSDS,ROHS,FCC,ce
Item Weight:	1..29kg
Fast Charge:	Two-Way Fast Charge
Certified:	ce,FCC,SDS
Voltage:	12V
Special Features:	USB,Lighting,warning light,SOS Lighting
Product Name:	70mai Jump Starter Max
Model Number:	Midrive PS06
Material:	PC+ABS+UV
Dimensions:	93.2*217.2*28.6mm
Capacity:	18000mah/66.6Wh
Output:	5V/2.4A, DC 12V/10A, 12V jump starter
Input:	5V/2A
Time needed for full charge:	8 hours
Jump start current:	450A
Operating temperature:	-20~55°C
Charging temperature:	0~55°C
Packing List:	Jump Starter Max+ Charge cable + Smart battery clip+ Bag + DC cable

PS06

1. Please read this manual carefully before using the device.

2. The device must not be used in place of a car battery.

3. Do not use the device as a toy.

4. To reduce the risk of injury, closely supervise any children that are around the device.

5. The device is intended for the jump starting of a 12V car battery and should not be used for any other purposes.

6. Please use the battery clips provided. If the battery clip or cable is damaged, do not use the device as it may result in fire, electric shock or other personal injuries.

7. Do connect the positive and negative ends of the battery directly.

8. Before jump starting the car battery, ensure that the connections are free of rust and other foreign objects. Connect the device securely to the battery clips to prevent the jump start performance from being affected by poor connection.

9. After the car battery is jump started successfully, disconnect the device from the car battery within 30 seconds to prevent any damage.

10. Do not use the device for more than 3 consecutive times. Otherwise, the device may overheat and be damaged. If multiple jump starts are to be performed, ensure there is an interval of 2 minutes between each jump starts.

11. Do not use the clips to charge any other devices.

12. Do not place the product in an environment where the temperature exceeds 60℃.

13. Charging should be done at room temperature of between 0℃ to 45℃.14

14. Do not expose the device to rain or submerge it in water.

15. Do not place the device in extreme heat or in a fire.

16. Do not use the product in an environment with explosion risk, such as in near flammable liquids or gases, or in the presence of dust.

17. Before using the device, ensure that someone is near enough to hear you or provide assistance to you.

18. Before using the device, remove any metallic objects on your body, such as rings, bracelets and necklaces.

19. To reduce the risk of damage to the power plug and cable, please disconnect the device from the battery clips using the battery clip plug.

20. Do not use any damaged or modified batteries. Otherwise it may lead to unpredictable consequences such as fire, explosion or injuries.

21. Please use the charging cable provided or one of similar specification to the device's input port to charge the device.

22. Do not charge the device immediately after it is being used to jump start a car battery.

23. Do not use the device to jump start a car battery while it is being charged.

24. In extreme cases, fluid may leak from the battery. Do not allow the fluid to come into direct contact with you hand or skin. In case of contact, wash the part immediately with soap and water. If the fluid accidentally gets in your eyes. Wash your eyes using cold water for at least 10 minutes before seeking medical attention immediately.

25. As the device contains a lithium battery, dispose it in accordance with the local regulations at the end of the product's service life.

 

PS01

Connect your portable jump starter, start your car, disconnect the jump starter, and then leave. Don't wait for someone to save you, take care of it yourself and leave. 

Cellphone will always have 4% battery power when you need them most. A good reason to keep a power pack jump starter in your car is that most will have a USB port on them that you can use to charge your phone. You can also use it to charge a tablet and anything else that gets it's charge through a USB chord.

Basic Parameters  

Dimensions: 163×87×27mm 

Capacity: 11100mAh(41.07Wh)

Output: 5V / 2.4A,12V jump starter port 

Input: 5V / 2A

Charging time: ≤5.5hours

Jump start current: 250A

Peak current: 600A

Operating temperature: -20℃~55℃

Charging temperature: 0~55℃

In full charged status,you can use highlight lighting continuously for 48 hours.Help you handle emergency situation freely when equipped your car with it.

Independent lighting switch,you can change it into lighting ,Strobe lighting and SOS signal light by one switch.                                                                                                                

3. After the car is jump started, remove the battery clips.

When the green light is turned on, the connection is correct and the battery can be jump started.

When the red light is turned on and a buzzer sound can be heard, the clips are connected to the wrong ends. Connect the clips correctly and make sure the green light is turned on before jump starting the battery.

When the green light is flickering and a buzzer sound can be heard, the voltage is too low. Press the boost button and wait till the green light stops flickering. Jump start the battery within 30 seconds.

When both the green and red lights are not turned on and no buzzer sound can be heard, the battery may be completed damaged. Ensure that the clips are connected to the correct ends. Press the boost button and wait till thegreen light is turned on. Jump start the battery within 30 seconds.

2. Connect the battery clips correctly to the positive and negative ends of the car battery. The red clip should be connected to the positive (+) end, while the black clip should be connected to the negative (-) end. Then, follow the instructions below:

1. Connect the jump starter to the device. Ensure that the indicator on the battery clips are off.

How to use the 70mai Jump Starter? Using the device as a 12V jump starter

3.Temperature Protection and Smart Clamps:
-Temperature protection design provide full protection to ensure the safety of usage from overheating.
-Eight protection smart clamp: Short-circuit protection, Over-voltage protection, Over-current protection, Over-charge protection,
-High-temperature protection, Reverse connect protection, Over discharge protection, Reverse filling protection.

2.Built-in LED battery Indicator Light, Waterproof and fireproof design:4 small led battery indicator lights show the remaining battery, smooth surface without leaving fingerprints, fire-proof and waterproof material design,

1.Multifunctional Power Bank:
-Our jump starter is very smart and multifunctional, built in a 5V/2.4A USB charging port and LED flashlight. USB output charging port
-can be used to charge mobile phone, tablet, camera and so on, it's very necessary when your electronic equipment is dead. Whether
-you need light to change a tire, inspect an engine, or need to warn oncoming traffic that you are broken down on the -roadside, theultra-bright flashlight have you covered, and it has three lighting modes: lighting, SOS, flash.

eature and Specification